Description
Walksnail AVATAR HD NANO KIT V3
The Avatar HD system uses H.265 code,an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency.
Designed to carry dual antennas to achieve more stable and powerful signals.
Single Board Design,16g Light Weight
VTX weights only 16g,designed with single board and 25.5*25.5mm mounting hole distance,making installation easier.
22ms Low Latency
Supports both high frame rate and standard frame rate, in high frame rate,it has an average latency of 22ms.
8G Built-in Storage
The Avatar vtx comes with 8g built-in storage it can record 1080p or 720p HD flight videos without interference.
HD 1080p OLED Dual Micro Displays.
Canvas Mode
Supports Betaflight, kiss, Inav, Ardu full OSD display and customization, you can easily adjust the parameters you want by remote control.
Specification | |
Camera | |
Model | Avatar nano/Avatar camera |
Image Sensor | 1/2.7”1nch |
Resolution | 1080P/60fps,720P/120fps,720P/60fps |
Ratio | 16/9 4/3 |
Lens | 2.1mm |
FOV | 170° |
Aperture | F2.0 |
Shutter | Rolling shutter |
Min.Illumination | 0.001Lux |
Weight | 3.5g/6g |
Dimensions | 14*14*17mm/19*19*22mm |
Coaxial Cable | 90mm/140mm |
VTX | |
Model | Avatar module |
Communication Frequency | 5.725-5.850GHz |
Transmitter Power (EIRP) | FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm |
1/O Interface | JST1.0*6(Power in)JST1.0*4(USB) |
Mounting Holes | 25.5*25.5mm |
Dimensions | 33*33*9.5mm |
Storage | 8G |
Recording | 1080p/720p |
Weight | 16g |
Operating Temperature | -20-40℃ |
Channels | 8 |
Wide Power Input | 6V-25.2V |
Supported FC System | Betaflight |
OSD | Canvas mode |
Latency | Average delay 22ms |
Antenna | 2(IPEX) |
Goggles Antenna | |
Model | Red bird |
Polarization | LHCP |
Bandwidth | 5.6GHz-6.0GHZ |
Average Gain | 1.9dBi |
Radiation Efficiency | ≥97% |
VSWR | ≤1.3 |
Cross-Polar Rejection | -15to-30dB |
Connector | RP-SMA |
Dimension | H24.8mm*R15.3mm |
Weight | 4.2g |
Packing List | |
Avatar HD KIT | X1 |
4 Pin USB Cable | X1 |
6 Pin Power Cable | X1 |
M2x3/4/5mm Screws | X4 |
M1.2×1.5mm Screws | X2 |
Avatar HD Nano KIT | X1 |
4 Pin USB Cable | X1 |
6 Pin Power Cable | X1 |
M2x3/4/5mm Screws | X2 |
M1.2×1.5mm Screws | X2 |
14-19mm Bracket | X1 |